$150.00
Use it to mount your smaller tablet to a mic stand, with absolutely no wiggle, wobble, or droop.
MondoClamp Assemblies
The MondoClamp modular family of mounting components allows users to create their own super-strong, custom mounting solutions. On this page you'll find pre-built assemblies that save you time and money (over ordering the components and building them yourself). These assemblies can also give you ideas about how to combine the modular components in the set to build useful things of your own design. You can use these assemblies as-is, or as a starting point for something more complex.
The whole system was designed to absolutely minimize wobble and droop, even for heavy loads.
$175.00
Use it to mount your larger tablet to a mic stand, with absolutely no wiggle, wobble, or droop.
$150.00
The KeyboardClamp will securely mount any small keyboard to a mic stand, drum stand, etc. It holds a CME X-key 37 keyboard beautifully, for example, or a pair of Roli Lumi Keys. The stand is completely rigid; there is absolutely no wobble or droop, even out at the ends. For the X-key, the stand works great as is. For others, you might wish to add L-Rails to keep it from slipping, or simply use Velcro.
$200.00
If it's heavy, you need to mount it to a mic stand, and it absolutely must not wobble or droop.
$190.00
Super basic, light yet extremely strong. Lots of pass-through mounting points; lots of cable access holes.
With all other pedal boards, when you run out of room you have no choice but to buy a larger one. But our PedalBoard's modular design lets you start small and increase incrementally as you need more room. You can also add other MondoClamp attachments. For example, add a MicStandClamp_L and your PedalBoard can eliminate the base for your mic stand.
$260.00
Super basic, light yet extremely strong. Lots of pass-through mounting points; lots of cable access holes.
With all other pedal boards, when you run out of room you have no choice but to buy a larger one. But our PedalBoard's modular design lets you start small and increase incrementally as you need more room. You can also add other MondoClamp attachments. For example, add a MicStandClamp_L and your PedalBoard can eliminate the base for your mic stand.
$385.00
Super basic, light yet extremely strong. Lots of pass-through mounting points; lots of cable access holes.
With all other pedal boards, when you run out of room you have no choice but to buy a larger one. But our PedalBoard's modular design lets you start small and increase incrementally as you need more room.
You can also add other MondoClamp attachments. For example, add a MicStandClamp_L and your PedalBoard can eliminate the need to carry your heavy mic stand base.
$95.00
This clamp works wonderfully to rigidly pole-mount Genelec monitor speakers -- such as the 8030, 8040, or 8050 -- without wobble or droop. The swivel is designed to keep the monitor center of gravity directly over the pole. I'd recommend a beefy, low-yet-wide stand, such as the Ultimate Support Tour-T-Short tripod base microphone stand.
When you raise monitor speakers a foot or two off the floor, you can lower their stage volume without reducing the apparent volume at the performer's ears. It really helps get more apparent volume without feedback. Halfway to headphones!
$100.00
This is generally used to attach a DeckPlate to a mic stand. For example, this the basis for the Keyboard Clamp and the iPadClamp. It's also used to add a mic stand clamp to a PedalBoard.
Out of stock
This is similar to the large TabletClamp, but it has a C-Clamp attached. The idea is that you clamp it directly to the back of your keyboard, and you've got a tablet or music stand. Accomodates keyboard thickness to approx. 7".
Out of stock
This allows you to attach any item with a standard threaded camera tripod attach point (1/4"-20).
Out of stock
If you don't need a counterweight, this is perfect for attaching a 5/8" threaded boom to the top of a 5/8" threaded mic stand.
Out of stock
This is useful when you have to hang a DMX moving-head lighting fixture from a pipe that is not level. Attach a standard lighting clamp to the female-threaded swivel inside, and attach the lighting fixture to the 10mm-1.5 bolt protruding from the swivel outside.